RCS: First time stamp: [003.118] ___ _ __ __ ___ __ _______ __ / _ |__ ____ __ (_)__ _ / / / /___/ _ )___ ___ / /_ / __/ _ \/ / / __ |\ \ /\ \ // / _ `/ / /_/ /___/ _ / _ \/ _ \/ __/ _\ \/ ___/ /__ /_/ |_/_\_\/_\_\/_/\_,_/ \____/ /____/\___/\___/\__/ /___/_/ /____/ Axxia Version: lsi_axxia_u-boot_5.8.1.84-449-g06680f3 Ericsson Version: 7/CXC1736593/52_R2A (Nov 20 2015 - 12:20:51) rcs-uboot git-rev: 06680f326f4e1fb7221cce87de277b6198a6f6fa RCS: Reset Status = 0x00000201 SF: Detected N25Q064 with page size 64 KiB, total 8 MiB Parameters: Watchdog 0 A/B Valid 1/1 A/B Sequence 0/0 => A Parameter Table Version: 9 Description: CPM1-52 AXM HW config CXC 173 6595/52 R5A RCS: BPM SVS configuration: 940 mV global->flags = 47 DDR Retention enabled in U-Boot Parameter Flags ddrRetentionEnable = 1 ddrRecovery = 0 RCS: SMEM0 DDR3 reset RCS: SMEM1 DDR3 reset checking smId 0 *buf (2003f800) : 50524f4d SMEM0 DDR PHY register restore succeeded checking smId 1 *buf (2003f880) : 50524f4d SMEM1 DDR PHY register restore succeeded System: 400 MHz Loss of Lock Count 0 Cpu: 1400 MHz Loss of Lock Count 0 Memory: 1600 MHz Loss of Lock Count 0/0 Fabric: 1200 MHz Loss of Lock Count 0 Tree: 1333 MHz Loss of Lock Count 0 Peripheral: 200 MHz SD/eMMC: 200 MHz System initialized RCS: System initialized. Time stamp: [003.733] RCS: SMEM Data Bus Test Testing 40000000 ... 40000004: Iteration: 1 Tested 1 iteration(s) with 0 errors. Testing 40000004 ... 40000008: Iteration: 1 Tested 1 iteration(s) with 0 errors. Testing 40000100 ... 40000104: Iteration: 1 Tested 1 iteration(s) with 0 errors. Testing 40000104 ... 40000108: Iteration: 1 Tested 1 iteration(s) with 0 errors. RCS: SMEM Address Bus Test Testing 40000000 ... 40200000: Iteration: 1 Tested 1 iteration(s) with 0 errors. RCS: SMEM U-Boot region Data Test Testing 40000000 ... 403fffff: Iteration: 1 Tested 1 iteration(s) with 0 errors. RCS: Power On restart, Persistent Memory Data Test Testing 60000000 ... 63ffffff: Iteration: 1 Tested 1 iteration(s) with 0 errors. RCS: Memory testing successful checking phyRegs[0] 2003f800 = 50524f4d checking phyRegs[1] 2003f880 = 50524f4d SF: Detected N25Q064 with page size 64 KiB, total 8 MiB SF: Detected N25Q064 with page size 64 KiB, total 8 MiB Checking U-Boot Image A Checking U-Boot Image B U-Boot: Watchdog 0 A/B Valid 1/1 A/B Sequence 0/0 => A ___ _ __ __ ___ __ / _ |__ ____ __ (_)__ _ / / / /___/ _ )___ ___ / /_ / __ |\ \ /\ \ // / _ `/ / /_/ /___/ _ / _ \/ _ \/ __/ /_/ |_/_\_\/_\_\/_/\_,_/ \____/ /____/\___/\___/\__/ Ericsson Version: 8/CXC1736593/52_R2B (Feb 26 2016 - 17:23:13) rcs-uboot git-rev: fb617cd7dfb3c4e625ce702ed8e7f2742fdd151c U-Boot 2013.01.01-00006-gfb617cd (Feb 26 2016 - 17:23:07) Axxia Version: lsi_axxia_u-boot_5.8.1.84-462-gfb617cd SF: Detected N25Q064 with page size 64 KiB, total 8 MiB Parameters: Watchdog 0 A/B Valid 1/1 A/B Sequence 0/0 => A Parameter Table Version: 9 Description: CPM1-52 AXM HW config CXC 173 6595/52 R5A Sysmem Size: 8192 Mb SF: Detected N25Q064 with page size 64 KiB, total 8 MiB PEI0 pciStatus = 0x80018 PCIE0 link State DOWN = 0x0 PEI0: Configuration: Enabled, Root Complex. PEI0 pci_status = 0x80018 PCIE status = 0x00080018 : PCI link state = 0x0 PCI link in bad state - resetting PCI link state now = 0x0 Adding cluster 0 to the coherency domain. Updating s0_qos_control: 0x00000000 => 0x00cc000c Net: LSI_FEMAC Welcome to RCS/U-boot main application. --------------------------------------- RCS: productnumber KDU 137 925/31 RCS: productrevision R5A RCS: productname DUS 52 01 RCS: productdate 20170407 RCS: serialnumber D16W234814 RCS: marketname Baseband 5216 RCS: ethaddr 34:6E:9D:80:4A:E5 SF: Detected N25Q064 with page size 64 KiB, total 8 MiB RCS: Checking DTB-A area cmd_lsi_sbb: Image is Valid RCS: Checking DTB-B area cmd_lsi_sbb: Image is Valid RCS: DTB info: valid 1/1, seq 0/0, wd 0 RCS: Fetching DTB-A area cmd_lsi_sbb: Image is Valid RCS: Ericsson DTB Version: 6/CXC1736593/52_R4C RCS: DBB5 debug switch in position 0 RCS: Secure Boot Enabled RCS: System watchdog enabled (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Device 0: Vendor: MICRON Rev: 1112 Prod: eUSB DISK Type: Hard Disk Capacity: 7744.0 MB = 7.5 GB (15859712 x 512) RCS: USB Disk: Health Info for MU 0: RCS: USB Disk: Data blocks:0965 Bad blocks:0000 Spare blocks:0047 RCS: USB Disk: Health Info for MU 1: RCS: USB Disk: Data blocks:0972 Bad blocks:0000 Spare blocks:0047 8 bytes read in 116 ms (0 Bytes/s) 8 bytes read in 131 ms (0 Bytes/s) RCS: Time stamp in mailbox adjusted with 29 seconds RCS: Latest saved date and time: Mon Apr 10 05:18:28 2017 RCS: BOOT <--> OS mailbox located at 0x20000000 RCS: BPM system condition = 0x08 RCS: Reset Status = Power On SF: Detected N25Q064 with page size 64 KiB, total 8 MiB SF: Detected N25Q064 with page size 64 KiB, total 8 MiB RCS: Board with trusted anchors RCS: Board with vendor credentials RCS: boot_count = 1, load configured kernel. RCS: CPM1 FPGA loading ... ** File not found configured/icm_io.bin ** RCS: FPGA file not found! ** File not found configured/linux.img ** ** File not found configured/bootfs.cpio.gz ** cmd_lsi_sbb: Not a Signed/Encrypted Image cmd_lsi_sbb: Not a Signed/Encrypted Image RCS: Loading of configured kernel failed - try fallback kernel..... RCS: Ericsson DTB Version: 6/CXC1736593/52_R4C RCS: Load fallback kernel. RCS: CPM1 FPGA loading ... ** File not found fallback/icm_io.bin ** RCS: FPGA file not found! ** File not found fallback/linux.img ** ** File not found fallback/bootfs.cpio.gz ** cmd_lsi_sbb: Not a Signed/Encrypted Image cmd_lsi_sbb: Not a Signed/Encrypted Image RCS: Loading of fallback kernel failed - try network loader (type3) kernel..... RCS: Ericsson DTB Version: 6/CXC1736593/52_R4C RCS: Load network loader (type3) kernel. RCS: CPM1 FPGA loading ... ** File not found networkloader/icm_io.bin ** RCS: FPGA file not found! ** File not found networkloader/linux.img ** ** File not found networkloader/bootfs.cpio.gz ** cmd_lsi_sbb: Not a Signed/Encrypted Image cmd_lsi_sbb: Not a Signed/Encrypted Image RCS: Loading of network loader (type3) kernel failed - try network loader (type2) kernel..... RCS: Ericsson DTB Version: 6/CXC1736593/52_R4C RCS: Load network loader (type2) kernel. RCS: CPM1 FPGA loading ... Successful! RCS: Reinitializing PCIe: PEI0: Configuration: Enabled, Root Complex. PEI0 pci_status = 0x80118 PCIE status = 0x00080118 : PCI link state = 0x1 PCI link in bad state - resetting PCI link state now = 0xb PEI0: x1 @ 2.5Gbps PCI Autoconfig: Bus Memory region: [0x0-0xfffff], Physical Memory [0-fffffx] PCI Scan: Found Bus 0, Device 0, Function 0 00:00.0 - 1000:5120 - Network controller PCI Autoconfig: BAR 0, Mem, size=0xc0000000, No room in resource PCI Autoconfig: BAR 1, I/O, size=0x4, No resource PCI Autoconfig: BAR 2, I/O, size=0xff04, No resource PCIE0: successfully set as root-complex PCI Autoconfig: Bus Memory region: [0x80000000-0xbfffffff], Physical Memory [c0000000-ffffffffx] PCI Scan: Found Bus 1, Device 0, Function 0 01:00.0 - 1a25:0001 - Does not fit any class PCI Autoconfig: BAR 0, Mem, size=0x8000000, address=0x80000000 bus_lower=0x88000000 3282688 bytes read in 572 ms (5.5 MiB/s) 29172656 bytes read in 2900 ms (9.6 MiB/s) cmd_lsi_sbb: Image is Valid cmd_lsi_sbb: Image is Valid RCS: Looking for fit dtb image: ## Copying 'cpm1_52_fdt' subimage from FIT image at 04000000 ... crc32+ sha1+ Loading part 12 ... OK RCS: Start merge DTB with info from FIT DTB image RCS: Number of new mem reserve areas: 0 RCS: Number of new nodes: 4 RCS: Number of new properties: 24 RCS: Number of properties with new value: 11 RCS: Number of deleted nodes: 3 RCS: Number of deleted properties: 0 RCS: DTB successfully merged! RCS: Ericsson DTB Version: 6/CXC1736593/52_R4C RCS: Looking for soft.dtb file: ** File not found networkloader/soft.dtb ** ## Booting kernel from FIT Image at 04000000 ... Using 'config@1' configuration Trying 'kernel@1' kernel subimage Description: Linux Kernel Type: Kernel Image Compression: gzip compressed Data Start: 0x040000e4 Data Size: 3220828 Bytes = 3.1 MiB Architecture: ARM OS: Linux Load Address: 0x00408000 Entry Point: 0x00408000 Hash algo: crc32 Hash value: 6258bcc9 Hash algo: sha1 Hash value: 3ab6a999ae7274f77b0d7f7012641bc374802114 Verifying Hash Integrity ... crc32+ sha1+ OK ## Flattened Device Tree blob at 05000000 Booting using the fdt blob at 0x05000000 USB HostController successfully stopped Uncompressing Kernel Image ... OK reserving fdt memory region: addr=5000000 size=14000 Using Device Tree in place at 05000000, end 05016fff SF: Detected N25Q064 with page size 64 KiB, total 8 MiB Parameters: Watchdog 0 A/B Valid 1/1 A/B Sequence 0/0 => A Parameter Table Version: 9 Description: CPM1-52 AXM HW config CXC 173 6595/52 R5A Fixing up mac-address and local-mac-address (34:6e:9d:80:4a:e5) for ethernet0 axxia.c:468 - Based on pfuse (0x01800109), clusters=0x7 number_of_clusters=3 Using "clusters" from the U-Boot Environment. Setting up Coherency for Clusters: 0,1,2 Adding cluster 1 to the coherency domain. Adding cluster 2 to the coherency domain. /clocks/cpu/frequency: 1400000000 /clocks/peripheral/frequency: 200000000 /clocks/emmc/frequency: 200000000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.21-rt13-wrl800.6_2.40_2 (rcsci2@esekilx5336) (gcc version 5.2.0 (Wind River Linux 5.2.0-8.0) ) #1 SMP Thu Dec 22 16:44:27 CET 2016 [ 0.000000] CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: DUS52 (CPM1-52) [ 0.000000] CPM1: NPU memory block [0x00000080000000-0x000000ffffffff] [ 0.000000] CPM1: SEMI memory block [0x00000020000000-0x00000023ffffff] [ 0.000000] Forcing write-allocate cache policy for SMP [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 1556480 [ 0.000000] free_area_init_node: node 0, pgdat c0a2adc0, node_mem_map eaffa000 [ 0.000000] DMA zone: 1710 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 178176 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1378304 pages, LIFO batch:31 [ 0.000000] CPM1: dtbfix_early, aliases = eafbfb28 [ 0.000000] DTB version: 2 [ 0.000000] dtbfix: Checking dtb compatibility [ 0.000000] dtbfix: root_node = eafbf3a0 [ 0.000000] dtbfix: soc_node = eafc1278 [ 0.000000] dtbfix: amba_node = eafc3778 [ 0.000000] dtbfix: rcs_node = eafc5eec [ 0.000000] dtbfix: No compatible property in /rcs_nodes, adding compatible=simple_bus [ 0.000000] dtbfix: No reg property in /rcs_nodes/axm-nor@0, adding reg=0 [ 0.000000] dtbfix: Add cs_gpios property in /rcs_nodes/axm-nor@0 with phandle 2 [ 0.000000] PERCPU: Embedded 11 pages/cpu @eaf39000 s15936 r8192 d20928 u45056 [ 0.000000] pcpu-alloc: s15936 r8192 d20928 u45056 alloc=11*4096 [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 [ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1554770 [ 0.000000] Kernel command line: console=ttyAMA0 earlyprintk debug initrd=0x08000000,100M rdinit=/linuxrc.sh [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 45056 bytes [ 0.000000] log_buf_len min size: 16384 bytes [ 0.000000] log_buf_len: 65536 bytes [ 0.000000] early log buf free: 13932(85%) [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 6060600K/6225920K available (4492K kernel code, 208K rwdata, 1384K rodata, 200K init, 141K bss, 165320K reserved, 0K cma-reserved, 5513216K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0408000 - 0xc09c5630 (5878 kB) [ 0.000000] .init : 0xc09c6000 - 0xc09f8000 ( 200 kB) [ 0.000000] .data : 0xc09f8000 - 0xc0a2c200 ( 209 kB) [ 0.000000] .bss : 0xc0a2f000 - 0xc0a525a4 ( 142 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=12. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 [ 0.000000] NR_IRQS:256 [ 0.000000] axxia_gic_of_init [ 0.000000] axxia: init_clocks: is_sim=0 [ 0.000000] Architected cp15 timer(s) running at 256.00MHz (phys). [ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x3b0a9be803, max_idle_ns: 440795202125 ns [ 0.000004] sched_clock: 56 bits at 256MHz, resolution 3ns, wraps every 2199023255550ns [ 0.000012] Switching to timer-based delay loop, resolution 3ns [ 0.000101] clocksource arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000320] clocksource axxia-timer0: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000621] Console: colour dummy device 80x30 [ 0.000638] Calibrating delay loop (skipped), value calculated using timer frequency.. 512.00 BogoMIPS (lpj=2560000) [ 0.000649] pid_max: default: 32768 minimum: 301 [ 0.000776] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000784] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001246] Initializing cgroup subsys memory [ 0.001273] Initializing cgroup subsys net_cls [ 0.001289] CPU: Testing write buffer coherency: ok [ 0.001570] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001580] axxia: Cross-cluster SEV fixup: no [ 0.002297] Setting up static identity map for 0x408240 - 0x408274 [ 0.006432] RBS-SYS : Setup soft lockup detector [ 0.007929] watchdog_enable cpu 0 [ 0.124783] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.124880] watchdog_enable cpu 1 [ 0.209471] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.209552] watchdog_enable cpu 2 [ 0.283995] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.284021] watchdog_enable cpu 3 [ 0.321283] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100 [ 0.321363] watchdog_enable cpu 4 [ 0.379528] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101 [ 0.379589] watchdog_enable cpu 5 [ 0.429307] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102 [ 0.429361] watchdog_enable cpu 6 [ 0.470779] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103 [ 0.470820] watchdog_enable cpu 7 [ 0.503968] CPU8: thread -1, cpu 0, socket 2, mpidr 80000200 [ 0.504031] watchdog_enable cpu 8 [ 0.528890] CPU9: thread -1, cpu 1, socket 2, mpidr 80000201 [ 0.528938] watchdog_enable cpu 9 [ 0.550119] CPU10: thread -1, cpu 2, socket 2, mpidr 80000202 [ 0.550164] watchdog_enable cpu 10 [ 0.570506] CPU11: thread -1, cpu 3, socket 2, mpidr 80000203 [ 0.570541] watchdog_enable cpu 11 [ 0.570578] Brought up 12 CPUs [ 0.570587] SMP: Total of 12 processors activated (6144.00 BogoMIPS). [ 0.570593] CPU: All CPU(s) started in HYP mode. [ 0.570598] CPU: Virtualization extensions available. [ 0.570903] devtmpfs: initialized [ 0.583921] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.584037] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.584822] NET: Registered protocol family 16 [ 0.585156] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.586109] NET: Registered protocol family 12 [ 0.586131] RBS sys: board type 11 [ 0.586390] cpm1_wdt: axxia System Watchdog poll started [ 0.586397] RBS-SYS : System WD supervision started [ 0.590597] DDR Retention Reset Initialized (dbg 0) [ 0.591291] console [pstore-1] enabled [ 0.591299] pstore: Registered ramoops as persistent store backend [ 0.591308] ramoops: attached 0x100000@0x23a00000, ecc: 0/0 [ 0.591349] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.591358] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.591381] Serial: AMBA PL011 UART driver [ 0.591445] 2010080000.uart: ttyAMA0 at MMIO 0x2010080000 (irq = 88, base_baud = 0) is a PL011 rev2 [ 1.275806] console [ttyAMA0] enabled [ 1.279772] RBS_SYS: mailbox base 20000000, size 4096 [ 1.284825] RBS_SYS: ramlog base 20001000, size 61440 [ 1.289872] RBS sys: boot mailbox API version: 0x1 [ 1.294657] RBS sys: STARTING [ 1.328584] vgaarb: loaded [ 1.331465] SCSI subsystem initialized [ 1.335242] ssp-pl022 2010088000.ssp: ARM PL022 driver, device ID: 0x00041022 [ 1.342629] usbcore: registered new interface driver usbfs [ 1.348152] usbcore: registered new interface driver hub [ 1.353572] usbcore: registered new device driver usb [ 1.358671] pps_core: LinuxPPS API ver. 1 registered [ 1.363637] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.372782] PTP clock support registered [ 1.376710] EDAC MC: Ver: 3.0.0 [ 1.380521] Switched to clocksource arch_sys_counter [ 1.390521] NET: Registered protocol family 2 [ 1.395374] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.402472] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.408990] TCP: Hash tables configured (established 8192 bind 8192) [ 1.415376] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.421314] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.427837] NET: Registered protocol family 1 [ 1.432224] PCI: CLS 0 bytes, default 64 [ 1.436259] Unpacking initramfs... [ 2.469350] Initramfs unpacking failed: junk in compressed archive [ 2.520921] Freeing initrd memory: 102400K (c8000000 - ce400000) [ 2.527144] CPU PMU: probing PMU on CPU 0 [ 2.531203] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 2.539954] axxia platform perf enabled [ 2.544661] futex hash table entries: 4096 (order: 6, 262144 bytes) [ 2.551954] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.559084] bounce: pool size: 64 pages [ 2.562987] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.570382] io scheduler noop registered (default) [ 2.575631] PCIE0: Outbound 0x3000000000..0x301fffffff (CPU) -> 0x80000000 (PCI) [ 2.583033] PCIE0: Inbound 0x0 (PCI) -> 0x0..0x3fffffff (CPU) [ 2.588862] PCIE0: status=0x00084bf8, link state=0xb [ 2.593916] axxia-pci 3038000000.pciex: PCI host bridge to bus 0000:00 [ 2.600445] pci_bus 0000:00: root bus resource [mem 0x3000000000-0x301fffffff] (bus address [0x80000000-0x9fffffff]) [ 2.610987] pci 0000:00:00.0: [1000:5120] type 01 class 0x028000 [ 2.616994] pci 0000:00:00.0: ignoring class 0x028000 (doesn't match header type 01) [ 2.624756] pci 0000:00:00.0: Fixup PCI Class to PCI_CLASS_BRIDGE_HOST for 1000:5120 [ 2.632524] pci 0000:00:00.0: supports D1 [ 2.636647] PCI: bus0: Fast back to back transfers disabled [ 2.642228] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.650299] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [??? 0x00000000 flags 0x0] (conflicts with (null) [??? 0x00000000 flags 0x0]) [ 2.663730] pci 0000:01:00.0: [1a25:0001] type 00 class 0xff0000 [ 2.669767] pci 0000:01:00.0: reg 0x10: [mem 0x3000000000-0x3007ffffff] [ 2.676699] PCI: bus1: Fast back to back transfers disabled [ 2.682278] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.688891] pci_bus 0000:01: busn_res: can not insert [bus 01] under [??? 0x00000000 flags 0x0] (conflicts with (null) [??? 0x00000000 flags 0x0]) [ 2.702023] pci_bus 0000:00: busn_res: [??? 0x00000000 flags 0x0] end is updated to 01 [ 2.709946] pci 0000:01:00.0: BAR 0: assigned [mem 0x3000000000-0x3007ffffff] [ 2.717090] pci 0000:00:00.0: not setting up bridge for bus 0000:01 [ 2.729793] loop: module loaded [ 2.733622] tun: Universal TUN/TAP device driver, 1.6 [ 2.738669] tun: (C) 1999-2004 Max Krasnyansky [ 2.745065] MDIO: Initializing Axxia Wrappers. [ 2.749555] acp-femac: LSI(R) 10/100 Network Driver - version 2014-01-09 [ 2.756712] acp-femac: MAC 34:6e:9d:80:4a:e5 [ 2.774339] libphy: acp-femac-mdio: probed [ 2.851006] acp-femac 2010120000.femac eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=2010120000.femac:1e, irq=-1) [ 2.862313] acp-femac: PHY initialized successfully [ 2.867064] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.873863] ci13612-ehci 2010140000.usb: CI13612A EHCI USB Host Controller [ 2.880758] ci13612-ehci 2010140000.usb: new USB bus registered, assigned bus number 1 [ 2.888716] ci13612-ehci 2010140000.usb: irq 87, io mem 0x2010140000 [ 2.910528] ci13612-ehci 2010140000.usb: USB 2.0 started, EHCI 1.00 [ 2.916926] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.923721] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.930947] usb usb1: Product: CI13612A EHCI USB Host Controller [ 2.936948] usb usb1: Manufacturer: Linux 4.1.21-rt13-wrl800.6_2.40_2 ci13612_hcd [ 2.944432] usb usb1: SerialNumber: 2010140000.usb [ 2.949549] hub 1-0:1.0: USB hub found [ 2.953330] hub 1-0:1.0: 1 port detected [ 2.957442] ehci-pci: EHCI PCI platform driver [ 2.962007] usbcore: registered new interface driver usb-storage [ 2.968012] i2c /dev entries driver [ 2.972280] pca953x 0-0020: interrupt support not compiled in [ 2.978738] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com [ 2.987416] EDAC DEVICE0: Giving out device to module lsi_edac controller edac_l3: DEV 2000200400.edac_l3 (POLLED) [ 2.997921] EDAC DEVICE1: Giving out device to module lsi_edac controller edac_l2: DEV edac_l2 (POLLED) [ 3.007564] EDAC DEVICE2: Giving out device to module lsi_edac controller edac_cpu: DEV edac_cpu (POLLED) [ 3.017191] cpm1_wdt: axxia System Watchdog driver loaded [ 3.024223] ICM1: state 19 [ 3.026960] GACT probability on [ 3.030101] Mirror/redirect action on [ 3.033789] Simple TC action Loaded [ 3.037653] netem: version 1.3 [ 3.040748] u32 classifier [ 3.043449] Performance counters on [ 3.047276] input device check on [ 3.050941] Actions configured [ 3.054543] Initializing XFRM netlink socket [ 3.058934] NET: Registered protocol family 10 [ 3.064046] NET: Registered protocol family 17 [ 3.068502] NET: Registered protocol family 15 [ 3.072963] 8021q: 802.1Q VLAN Support v1.8 [ 3.077174] Key type dns_resolver registered [ 3.081492] ThumbEE CPU extension supported. [ 3.085765] Registering SWP/SWPB emulation handler [ 3.091185] ssp-pl022 2010088000.ssp: ARM PL022 driver, device ID: 0x00041022 [ 3.098372] pl022: mapped registers from 0x10088000 to f01dc000 [ 3.104549] m25p80 spi0.0: found n25q064, expected m25p80 [ 3.109945] m25p80 spi0.0: n25q064 (8192 Kbytes) [ 3.114577] Creating 19 MTD partitions on "axm-nor": [ 3.119538] 0x000000000000-0x000000040000 : "uboot_stage_2" [ 3.125628] 0x000000040000-0x000000050000 : "uboot_hw_param_0" [ 3.131945] 0x000000050000-0x000000060000 : "uboot_hw_param_1" [ 3.138258] 0x000000060000-0x000000360000 : "uboot_stage_3_0" [ 3.144504] 0x000000360000-0x000000660000 : "uboot_stage_3_1" [ 3.150775] 0x000000660000-0x000000670000 : "uboot_env_var_0" [ 3.157001] 0x000000670000-0x000000680000 : "uboot_env_var_1" [ 3.163233] 0x000000680000-0x0000006a0000 : "dtb_0" [ 3.168597] 0x0000006a0000-0x0000006c0000 : "spare_0" [ 3.174141] 0x0000006c0000-0x0000006e0000 : "dtb_1" [ 3.179496] 0x0000006e0000-0x000000730000 : "spare_1" [ 3.185043] 0x000000730000-0x000000740000 : "board_status_0" [ 3.191180] 0x000000740000-0x000000750000 : "board_status_1" [ 3.197309] 0x000000750000-0x000000760000 : "crl_seq_no_info" [ 3.203529] 0x000000760000-0x000000770000 : "spare_2" [ 3.209058] 0x000000770000-0x000000780000 : "test_area" [ 3.214767] 0x000000780000-0x0000007e0000 : "hw_log" [ 3.220207] 0x0000007e0000-0x0000007f0000 : "trusted_anchor" [ 3.226353] 0x0000007f0000-0x000000800000 : "vendor_credentials" [ 3.233041] ICM1: icm1_spi_probe [ 3.236264] ICM1: state 1b [ 3.239631] RBS sys: OPERATIONAL [ 3.243099] Freeing unused kernel memory: 200K (c09c6000 - c09f8000) [ 3.270541] usb 1-1: new high-speed USB device number 2 using ci13612-ehci [ 3.329428] Loading kernel module ncp [ 3.344981] ncp: Major number is 249 [ 3.348581] ncp: RTE was built with use swait disabled [ 3.353823] ncp: RTE was built with use hard irq disabled [ 3.359307] ncp: RTE was built with use raw spinlocks disabled [ 3.365235] ncp: RTE was built to use the BSP shared NCA/PIO locks [ 3.371507] ncp: RTE was built to enable BSP NCA reset detection [ 3.377676] ncp: ACP RTE driver version NCP-1.4.7.076 [ 3.382734] ncp: Setting up bus mappings for AXM55xx [ 3.387836] ncp: reading pfuse from SYSCON : 0x01800109 [ 3.393157] ncp: using fuseblock for chipType/Version [ 3.398206] ncp: ACP 9.1.0 ASIC [ 3.401372] ncp: Configuring interrupts [ 3.405603] ncp: total NCP devices configured: 1 [ 3.411219] Create device nodes for ncp [ 3.423075] usb 1-1: New USB device found, idVendor=0634, idProduct=1270 [ 3.429779] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.436923] usb 1-1: Product: Real SSD eUSB 8GB [ 3.441463] usb 1-1: Manufacturer: Micron Technology [ 3.446428] usb 1-1: SerialNumber: 12F0082700307172 [ 3.452055] usb-storage 1-1:1.0: USB Mass Storage device detected [ 3.454404] Loading kernel module adkNetD [ 3.458464] adk_netd:Intel(R) ADK Network Driver - version 1.0.16.004 [ 3.458467] adk_netd:Copyright (c) 2009-2016 Intel Corporation. [ 3.458470] adk_netd:debug=0x0 adk_netd_debug=0x0 [ 3.458473] [adk_netd] Timstamp Scan Count Max = 1000 [ 3.458475] [adk_netd] Timstamp Scan wait (jiffies) = 1000 [ 3.458595] adk_netd:netlink created for NETLINK_VEI_NETDEV (31) ret=cdffb400 [ 3.497074] scsi host0: usb-storage 1-1:1.0 marketname : Baseband 5216 name : product_information_data pba_productdate : 20170406 pba_productname : Baseband 5216 pba_productnumber : ROA 128 5502/1 pba_productrevision : R5G pba_serialnumber : D16W228196 productdate : 20170407 productname : DUS 52 01 productnumber : KDU 137 925/31 productrevision : R5A serialnumber : D16W234814 ethaddr : 34:6E:9D:80:4A:E5 nl: creating device[sda] files for USB-flashdisk nl: devices created [ 4.501504] scsi 0:0:0:0: Direct-Access MICRON eUSB DISK 1112 PQ: 0 ANSI: 0 CCS [ 4.510488] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.510978] sd 0:0:0:0: [sda] 15859712 512-byte logical blocks: (8.12 GB/7.56 GiB) [ 4.511467] sd 0:0:0:0: [sda] Write Protect is off [ 4.511474] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 4.511966] sd 0:0:0:0: [sda] No Caching mode page found [ 4.511972] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.518479] sda: sda1 sda2 sda3 [ 4.520594] sd 0:0:0:0: [sda] Attached SCSI disk nl: linuxrc.sh in networkloader executing nl: Starting networkloader AI nl: Starting disk check repair nl: Starting disk check /dev/sda2 fsck from util-linux 2.26.2 e2fsck 1.42.9 (28-Dec-2013) /dev/sda2: clean, 29/65536 files, 98535/262144 blocks nl: No faults found on /dev/sda2 => OK File descriptor[ 8.639670] random: lvscan urandom read with 21 bits of entropy available 3 (socket:[3558]) leaked on lvscan invocation. Parent PID 691: /bin/sh inactive '/dev/rootvg/rcs-lv' [2.73 GiB] inherit nl: Logical volume /dev/rootvg/rcs-lv found => OK File descriptor 3 (socket:[3558]) leaked on lvchange invocation. Parent PID 691: /bin/sh File descriptor 3 (socket:[3558]) leaked on lvscan invocation. Parent PID 691: /bin/sh ACTIVE '/dev/rootvg/rcs-lv' [2.73 GiB] inherit nl: Logical volume /dev/rootvg/rcs-lv is active nl: Success activating /dev/rootvg/rcs-lv nl: Starting disk check /dev/rootvg/rcs-lv fsck from util-linux 2.26.2 e2fsck 1.42.9 (28-Dec-2013) /dev/mapper/rootvg-rcs--lv: clean, 14/179520 files, 28722/716800 blocks nl: Diskcheck logical volume /dev/rootvg/rcs-lv => OK File descriptor 3 (socket:[3558]) leaked on lvscan invocation. Parent PID 691: /bin/sh nl: Logical volume /dev/rootvg/os-lv does not exist => OK File descriptor 3 (socket:[3558]) leaked on lvscan invocation. Parent PID 691: /bin/sh nl: Logical volume /dev/rootvg/hfs1-lv does not exist => OK File descriptor 3 (socket:[3558]) leaked on lvscan invocation. Parent PID 691: /bin/sh nl: Logical volume /dev/rootvg/hfs2-lv does not exist => OK File descriptor 3 (socket:[3558]) leaked on lvscan invocation. Parent PID 691: /bin/sh nl: Logical volume /dev/rootvg/dumps-lv does not exist => OK nl: Disk check repair done nl: Checking for prepared files for TN support nl: Partition type: ext2 nl: Found FPGA in /dev/sda2, copying to tmp nl: fpga found and copied to /tmp/nlstart/FPGA.cxp nl: saving RAM: rm /tmp/nlstart/FPGA.cxp nl: unpacking sw.ar for FPGA nl: saving RAM: rm sw.ar for FPGA nl: filepath resolved: /tmp/nlstart/unpack/cxp102171_1.xml nl: CXP name: COBRA_CXP102171_1_R43A01 nl: Creating directory for CXP mount: /tmp/nlstart/mnt/COBRA_CXP102171_1_R43A01 nl: Mounting squash on COBRA_CXP102171_1_R43A01 nl: FPGA CXP: COBRA_CXP102171_1_R43A01 installed at /sofware/COBRA_CXP102171_1_R43A01 nl: succeeded unpack fpga, touching /tmp/fpga_available nl: dus board preparing TN files nl: Prepared TN images firmware: icm-io:cobra:/t[ 10.622553] ICM1: Starting PS load... mp/nlstart/mnt/COBRA_CXP[ 10.627706] PCIE0: Error interrupt 0x20000 [ 10.633235] PCIE0: link status = 0x2811 102171_1_R43A01/[ 10.637075] PCIE0: t2a_fn_indp_err_stat = 0x1 CXC1735837_1/bin[ 10.637079] [0x114c] = 0x00000000 /top_cobra.perip[ 10.637081] [0x1150] = 0x00000000 h.rbf;icm-core:c[ 10.637083] [0x1154] = 0x00000000 obra:/tmp/nlstar[ 10.637085] [0x1158] = 0x00000000 t/mnt/COBRA_CXP1[ 10.637087] [0x115c] = 0x00000000 02171_1_R43A01/C[ 10.637089] [0x1160] = 0x00000000 XC1735836_1/bin/[ 10.637092] [0x1164] = 0x00000000 top_cobra.core.r[ 10.637094] [0x1168] = 0x00000000 bf;adk-npu-cfg:n[ 10.637096] [0x116c] = 0x00000000 pu-bb5216-2gb:/software/TN-DUSG2_CXP9022846_10_R24DL/lib[ 10.637098] [0x1170] = 0x00000001 /dus52_2gb_npu.c[ 10.637100] [0x1174] = 0x00000000 fg; [ 10.637102] [0x1178] = 0x00000000 [ 10.637104] [0x117c] = 0x00002811 [ 10.637106] [0x1180] = 0x00000000 [ 10.769086] ICM1: PS load successful nl: setting up devpts and loopback interface nl: Mounting pty nl: Enabling the loopback interface nl: setting a hostname create otp start script creating script starting otp erl -boot start_sasl -boot_var OTP_ROOT /nl/otp -env NL_TARGET true -env NLDIR /nl -pa /nl/ebin -env LOGDIR /nl/log/ -sasl errlog_type error +W w -s nl_app start erl result: 0 [ 10.981109] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 10.989176] pci 0000:01:00.0: [1a25:0001] type 00 class 0xff0000 [ 10.995233] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x07ffffff] [ 11.001868] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01 [ 11.008236] pci 0000:01:00.0: BAR 0: assigned [mem 0x3000000000-0x3007ffffff] [ 11.015386] pci 0000:00:00.0: not setting up bridge for bus 0000:01 [ 11.021732] icm1 0000:01:00.0: enabling device (0000 -> 0002) [ 11.028547] icm1 0000:01:00.0: Starting CvP... [ 11.070603] icm1 0000:01:00.0: Bit 2 wait time 0 ms [ 11.749935] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) nl: This is the placeholder script: /nl/bin/nl_arm_fs.sh /main/R2A/R3A/R4A/R5A/R7A/4 - test run [ 11.818735] mount -t pramfs -o physaddr=0x22200000,init=24M pramfs /var/trace [ 11.829649] pramfs: creating an empty pramfs of size 25165824 [ 11.835507] pramfs: blocksize 2048, num inodes 4919, num blocks 11673 [ 11.852722] pramfs: max file size 134217727 bytes [ 11.857819] Initiated and mounted pramfs on /var/trace [ 12.407429] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 12.941971] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 13.430530] icm1 0000:01:00.0: Bit 2 wait time 0 ms [ 13.435425] icm1 0000:01:00.0: Bit 6 wait time 0 ms [ 13.440305] icm1 0000:01:00.0: Bit 5 wait time 0 ms [ 13.445191] icm1 0000:01:00.0: CvP successful, application layer ready nl: dhcp result file does not exist, running dhcp nl: running dhcp-client [ 13.658091] ncp: Setting driver flag for 32 bit user-mode bitwidth! [ 13.735117] ncp: Mapped domainBundle PageAddr=0x000090000000 0x0012b000 bytes to KVA f2200000 [ 13.743815] ncp: Copied sw state from user ptr 480a4000 to kmode ptr cd5c0000 [ 13.753029] ncp: enabled configuration DMA on CPCQ 0 [ 13.770420] ncp: intr_config_nca - initialize irq handler for grp 0, pIsrCommon=cd8249ac [ 13.778675] ncp: intr_config_nca - initialize irq handler for grp 1, pIsrCommon=cd824a2c [ 13.786892] ncp: intr_config_nca - initialize irq handler for grp 2, pIsrCommon=cd824aac [ 13.795109] ncp: intr_config_nca - initialize irq handler for grp 3, pIsrCommon=cd824b2c [ 13.803325] ncp: intr_config_nca - initialize irq handler for grp 4, pIsrCommon=cd824bac [ 13.811538] ncp: intr_config_nca - initialize irq handler for grp 5, pIsrCommon=cd824c2c [ 13.819746] ncp: intr_config_nca - initialize irq handler for grp 6, pIsrCommon=cd824cac [ 13.827962] ncp: intr_config_nca - initialize irq handler for grp 7, pIsrCommon=cd824d2c [ 13.836175] ncp: intr_config_nca - initialize irq handler for grp 8, pIsrCommon=cd824dac [ 13.844392] ncp: intr_config_nca - initialize irq handler for grp 9, pIsrCommon=cd824e2c [ 13.852608] ncp: intr_config_nca - initialize irq handler for grp 10, pIsrCommon=cd824eac [ 13.860908] ncp: intr_config_nca - initialize irq handler for grp 11, pIsrCommon=cd824f2c [ 13.869203] ncp: intr_config_nca - initialize irq handler for grp 12, pIsrCommon=cd824fac [ 13.877504] ncp: intr_config_nca - initialize irq handler for grp 13, pIsrCommon=cd82502c [ 14.851331] acp-femac 2010120000.femac eth0: link up (100/Full) [ 15.479947] random: nonblocking pool is initialized [ 15.670181] adk_netd:Event received, configuration completed [ 15.675931] adk_netd:Application BW=1 [ 15.687244] adk_netd:Enabling interrupts VC exists, closing terminal [ 18.122944] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 18.359931] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 18.554807] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) Network Loader Ready: Version: CNX9012629-R7U05 Build date: 2017-01-02 08:37:26 [ 21.184046] IPv6: ADDRCONF(NETDEV_UP): adkgmac17: link is not ready [ 21.195750] adk_netd:adkgmac17, Link is UP 1000 Mbps Full Duplex [ 21.201779] adk_netd:adkgmac17, new state, carrier_state=1, tx_queue_stopped state =0 [ 21.209710] IPv6: ADDRCONF(NETDEV_CHANGE): adkgmac17: link becomes ready [ 21.283637] IPv6: ADDRCONF(NETDEV_UP): adkxgmac16: link is not ready [ 21.295457] adk_netd:adkxgmac16, Link is UP 1000 Mbps Full Duplex [ 21.301568] adk_netd:adkxgmac16, new state, carrier_state=1, tx_queue_stopped state =0 [ 21.309585] IPv6: ADDRCONF(NETDEV_CHANGE): adkxgmac16: link becomes ready [ 21.423711] IPv6: ADDRCONF(NETDEV_UP): adkxgmac1: link is not ready [ 21.435502] adk_netd:adkxgmac1, Link is UP 1000 Mbps Full Duplex [ 21.441528] adk_netd:adkxgmac1, new state, carrier_state=1, tx_queue_stopped state =0 [ 21.449456] IPv6: ADDRCONF(NETDEV_CHANGE): adkxgmac1: link becomes ready